agent concentration中文是什么意思

• 灭火剂浓度

• agent    provocateur (pl. agents prov ...
• concentration    n. 1.集中。 2.【化学】提浓，蒸浓，浓缩；浓度；稠 ...
• quenching concentration agent    猝灭浓剂
• concentration    n. 1.集中。 2.【化学】提浓，蒸浓，浓缩；浓度；稠密度；【矿物】汰选，选矿，富化。 3.集中注意，专心。 multi-stage ore concentration多段选矿法。 with deep concentration专心。
• concentration of no    一氧化碳浓度
• concentration on    注意力集中于
• as agent    做代理
• a concentration of flights    一次集中飞行
• absolute concentration    绝对浓度
• absorbent concentration    吸收浓度
• accelerator concentration    促进剂用量
• acceptable concentration    容许浓度
• acceptor concentration    受主浓度
• acid concentration    酸浓度; 酸浓缩
• acoustic concentration    声集中
• activity concentration    放射性活度浓度; 放射性浓度; 活性浓度
• actual concentration    实际浓度
• additive concentration    添加剂浓度
• admissible concentration    容许浓度
• adsorbent concentration    吸附浓度
• aerosol concentration    气溶胶检测器; 气溶胶浓度
• air concentration    空气浓度
• airpollution concentration    空气污染浓度
• alcohol concentration    酒精浓度

• Au radioactive tracer method . the effect of several variables such as stripping agent concentrations , the volume ratio of stripping agents to gold loaded organic phase and the continuous extraction after stripping was studied under 20 . it is found that nh
  等对季铵盐载金有机相的反萃，考察了反萃剂的浓度有机相与反萃剂的体积比等对反萃率的影响。
• The orthogonal experiment has been used to optimize the electrolyte composition and the craft parameters , with the increasing of the main salt and reducing agent concentration in the electrolyte , the electroless plating coating ’ s adhesive strength and the coverage ratio also increase ; increasing the complex agent content , the electroless plating coating ’ s adhesive strength and the coverage ratio exist the maximum value ; the electroless plating deposition rate distinctly increases when the electrolyte temperature and the ph value were increased , but the increasing of temperature and ph value affects the electrolyte ’ s stability
  采用正交实验对镀液成分、工艺参数进行了优化,随着镀液主盐、还原剂添加量的增加,镀层结合强度及其覆盖面依次增强,随着络合剂添加量的增加,镀层结合强度及其覆盖面先增加然后减少,随着镀液温度及其ph值的升高,化学镀沉积速度明显提高,但影响镀液的稳定性。